首 页 ┆ 文档资料 ┆ 下载资料 ┆ 维修视频 ┆ 包年699元
请登录  |  免费注册
当前位置：精通维修下载 > 文档资料 > 家电技术 > 单元电路介绍 > 其它电路
汉字液晶12864子程序
来源：本站整理  作者：佚名  2011-02-05 21:44:24



//ile://汉字液晶子程 液晶屏分为4行*12列汉字，全部使用模拟接口方式。
//   TGLCMLIMIT64A接口程序（模拟方式）
//;***************************************************************************
//;连线图:
//;*LCM---89C52*  *LCM---89C52*   *LCM-------89C52*     *LCM----------89C52* *
//;*DB0---P0.0*   *DB4---P0.4*    *D/I-------P2.6*      *CS1----------P2.4*  *
//;*DB1---P0.1*   *DB5---P0.5*    *R/W-------P2.7*      *CS2----------P2.5*  *
//;*DB2---P0.2*   *DB6---P0.6*    *RST--------VCC*      *CS3----------P3.2*  *
//;*DB3---P0.3*   *DB7---P0.7*    *E---------P2.3*                           *
//;注:89C52的晶振频率为12MHz                                                 *
//;***************************************************************************/
//file://画线部分请参照avr的c程序。
/*#pragma SRC   /*生成ASM文件开关,必要时打开 */
#include<REG52.H>
#include<math.h>
#include<INTRINS.H>

#define Uchar unsigned char

/***********液晶显示器接口引脚定义***************/

sbit Elcm= P3^5;  //
sbit CS1LCM= P3^2;  //
sbit CS2LCM= P3^4;  //
sbit CS3LCM= P3^2;  /*这个连接只是做实验的临时接法。*/
sbit DILcm= P3^7;  //
sbit Rwlcm= P3^6;  //
sfr Datalcm= 0x80;  //file://数据口
unsigned char testi[]={"浸渠叁绳漱塔烃威牺晓玄瑶"};

/***********常用操作命令和参数定义***************/
#define  DISPON  0x3f /*显示on  */
#define  DISPOFF 0x3e /*显示off  */
#define  DISPFIRST 0xc0 /*显示起始行定义 */
#define  SETX  0x40 /*X定位设定指令（页） */
#define  SETY  0xb8 /*Y定位设定指令（列） */
#define  LCDbusy 0x80 /*LCM忙判断位  */

/**************显示分区边界位置*****************/
#define  MODL  0x00 /*左区   */
#define  MODM  0x40 /*左区和中区分界 */
#define  MODR  0x80 /*中区和右区分界 */
#define LCMLIMIT 0xC0 /*显示区的右边界 */

/****************全局变量定义*******************/
Uchar col,row,cbyte;  /*列x,行(页)y,输出数据 */
bit xy;    /*画线方向标志：1水平 */

/*****************函数列表**********************/
void Lcminit(void);  /*液晶模块初始化 */
void Delay(Uchar);  /*延时，入口数为Ms */
void lcdbusyL(void);  /*busy判断、等待(左区) */
void lcdbusyM(void);  /*busy判断、等待(中区) */
void lcdbusyR(void);  /*busy判断、等待(右区) */
void Putedot(Uchar);  /*半角字符输出  */
void Putcdot(Uchar);  /*全角(汉字)输出 */
void Wrdata(Uchar);  /*数据输出给LCM  */
void Lcmcls( void );  /*LCM全屏幕清零(填充0) */
void wtcom(void);  /*公用busy等待  */
void LOCatexy(void);  /*光标定位  */
void WrcmdL(Uchar);  /*左区命令输出  */
void WrcmdM(Uchar);  /*中区命令输出  */
void WrcmdR(Uchar);  /*右区命令输出  */
void Putstr(Uchar *puts,Uchar i); /*中英文字符串输出 */
void Rollscreen(Uchar x); /*屏幕向上滚动演示 */
void Rddata(void);  /*  从液晶片上读数据 */
void Linehv(Uchar length); /*横(竖)方向画线 */
void point(void);  /*打点   */
void Linexy(Uchar endx,Uchar endy);

/******************数组列表*********************/
Uchar code Ezk[];  /*ASCII常规字符点阵码表 */
Uchar code Hzk[];  /*自用汉字点阵码表 */
Uchar code STR1[];  /*自定义字符串  */
Uchar code STR2[];  //
Uchar code STR3[];  //
Uchar code STR4[];  //


/********************************/
/* 演示主程序   */
/********************************/
void main(void)

{
  Uchar x,y;
 col=0;
 row=0;
 Delay(40);  /*延时大约40Ms,等待外设准备好 */
 Lcminit();  /*液晶模块初始化，包括全屏幕清屏*/
 Putstr(STR2,24); /*第一行字符输出，24字节 */
 col=0;
 row=2;
 Putstr(STR1,12); /*第二行字符输出，12字节 */
 col=0;
 row=4;
 Putstr(STR3,24); /*第三行字符输出，24字节 */
 col=0;
 row=6;
 Putstr(STR4,24); /*第四行字符输出，12字节 */
 x=0;
 col=0;
 row=0;
 xy = 1;   /*方向标志。定为水平方向 */
 Linehv(192);  /*画一条横线(0,0)-(191,0) */
 col=0;
 row=15;
 xy = 1;
 Linehv(192);  /*画一条横线(0,15)-(191,15) */
 col=0;
 row=32;
 xy = 1;
 Linehv(192);  /*画一条横线(0,32)-(191,32) */
 col=0;
 row=1;
 xy = 0;   /*方向标志。定为垂直方向 */
 Linehv(31);  /*画一条竖线(0,1)-(0,31) */
 col=191;
 row=1;
 xy = 0;
 Linehv(31);  /*画一条竖线(191,1)-(191,31) */
 col=0;   /*设定斜线的起点坐标  */
 row=63;
 Linexy(44,31);  /*画一段斜线(0,63)-(44,31) */
 col=44;
 row=31;
 Linexy(190,62);  /*继续画斜线(44,31)-(191,63) */
 while(1){
  Rollscreen(y); /*定位新的显示起*/
  y++;
  y %=8;
  x=testi[y];
  Delay(100); /*延时，控制滚动速度 */
  };
}


/************************************************/
/*画线。任意方向的斜线，不支持垂直的或水平线 */
/************************************************/

void Linexy(Uchar endx,Uchar endy)
{
 register Uchar t;
 int xerr=0,yerr=0,delta_x,delta_y,distance;
 Uchar incx,incy;

/*  compute the distance in both directions */
 delta_x=endx-col;
 delta_y=endy-row;

/* compute  the direction of the increment ,
 an increment of "0" means either a vertICal or horizontal lines */

 if(delta_x>0) incx=1;
 else if( delta_x==0 ) incx=0;
  else incx=-1;


 if(delta_y>0) incy=1;
 else if( delta_y==0 ) incy=0;
  else incy=-1;

/*  determine which distance is greater */
 delta_x = cabs( delta_x );
 delta_y = cabs( delta_y );

 if( delta_x > delta_y ) distance=delta_x;
 else distance=delta_y;

/* draw the line */
 for( t=0;t <= distance+1; t++ ) {
  point();
     xerr += delta_x ;
  yerr += delta_y ;
  if( xerr > distance ) {
   xerr-=distance;
       col+=incx;
  }
  if( yerr > distance ) {
   yerr-=distance;
       row+=incy;
  }

 }
}

/****************************************/
/*画线。只提供X或Y方向的，不支持斜线 */
/****************************************/
void Linehv(Uchar length)
 {
  Uchar xs,ys;
  if (xy){ys = col;
   for (xs=0;xs<length;xs++){
     col = ys + xs;
     point();}
    }
  else {xs = row;
   for (ys=0;ys<length;ys++){
     row = xs + ys;
     point();}
    }
}

/****************************************/
/* 画点    */
/****************************************/

void point(void)
 {
  Uchar x1,y1,x,y;
  x1=col;
  y1=row;
  row=y1>>3;  /*取Y方向分页地址 */
  Rddata();
  y=y1&0x07;  /*字节内位置计算 */
  x=0x01;
  x=x<<y;   /*移入所画点  */
  Wrdata(cbyte|x); /*画上屏幕  */
  col=x1;   /*恢复xy坐标  */
  row=y1;
 }

/****************************************/
/* 屏幕滚动定位   */
/****************************************/
void Rollscreen(Uchar x)
 {
  cbyte = DISPFIRST|x; /*定义显示起始行为x?*/
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
 }

/****************************************/
/* 一个字串的输出   */
/****************************************/
void Putstr(Uchar *puts,Uchar i)
 {
  Uchar j,X;
  for (j=0;j<i;j++)
  {
  X = puts[j];
   if (X&0x80)
    {
     Putcdot(X&0x7f); /*只保留低7位*/
    }
   else Putedot(X-0x20);  /*ascii码表从0x20开始*/
  }
 }

/****************************************/
/*   半角字符点阵码数据输出  */
/****************************************/
void Putedot(Uchar Order)
 {
 Uchar i,bakerx,bakery; /*共定义4个局部变量   */
 int x;   /*偏移量，字符量少的可以定义为UCHAR */
 bakerx = col;  /*暂存x,y坐标，已备下半个字符使用 */
 bakery = row;
 x=Order * 0x10;  /*半角字符，每个字符16字节 */
/*上半个字符输出，8列 */
 for(i=0;i<8;i++)
  {
  cbyte = Ezk[x];    /*取点阵码，rom数组 */
  Wrdata(cbyte);    /*写输出一字节  */
  x++;
  col++;
  if (col==LCMLIMIT){col=0;row++;row++;}; /*下一列，如果列越界换行*/
   if (row>7) row=0;  /*如果行越界，返回首行 */
  }     /*上半个字符输出结束 */

 col = bakerx;     /*列对齐  */
 row = bakery+1;     /*指向下半个字符行 */
/*下半个字符输出，8列 */
 for(i=0;i<8;i++)
  {
  cbyte = Ezk[x];    /*取点阵码  */
  Wrdata(cbyte);    /*写输出一字节  */
  x++;
  col++;
  if (col==LCMLIMIT){col=0;row=row+2;}; /*下一列，如果列越界换行*/
   if (row>7) row=1;  /*如果行越界，返回首行 */
  }     /*下半个字符输出结束 */
 row=bakery;
 }      /*整个字符输出结束 */


/****************************************/
/*  全角字符点阵码数据输出  */
/****************************************/
void Putcdot(Uchar Order)
 {
 Uchar i,bakerx,bakery;  /*共定义3个局部变量  */
 int x;    /*偏移量，字符量少的可以定义为UCHAR */
 bakerx = col;   /*暂存x,y坐标，已备下半个字符使用 */
 bakery = row;
 x=Order * 0x20;   /*每个字符32字节 */

/*上半个字符输出，16列 */
 for(i=0;i<16;i++)
  {
  Wrdata(Hzk[x]);    /*写输出一字节  */
  x++;
  col++;
  if (col==LCMLIMIT){ col=0;row++;row++;} /*下一列，如果列越界换行*/
   if (row>6) row=0;  /*如果行越界，返回首行 */
  }     /*上半个字符输出结束 */

/*下半个字符输出，16列 */
 col = bakerx;
 row = bakery+1;
 for(i=0;i<16;i++)    /*下半部分*/
  {
  Wrdata(Hzk[x]);
  x++;
  col++;
  if (col==LCMLIMIT){col=0;row++;row++;} /*下一列，如果列越界换行*/
   if (row>7) row=1;  /*如果行越界，返回首行 */
  }     /*下半个字符输出结束 */
 row = bakery;
 }      /*整个字符输出结束 */

/****************************************/
/* 清屏，全屏幕清零  */
/****************************************/
void Lcmcls( void )
 {
 for(row=0;row<8;row++)
     for(col=0;col<LCMLIMIT;col++) Wrdata(0);
 }

/****************************************/
/*  从液晶片上读数据，保留在全局变量中 */
/****************************************/

void Rddata(void)
 {
 Locatexy();  /*坐标定位，返回时保留分区状态不变 */
  Datalcm=0xFF;
  Dilcm = 1; /*数据*/
  Rwlcm = 1; /*读数据*/
  Elcm = 1; /*读入到LCM*/
  _nop_();
  cbyte = Datalcm; /*虚读一次 */
  Elcm = 0;
 Locatexy();  /*坐标定位，返回时保留分区状态不变 */
  Datalcm=0xFF;
  _nop_();
  Dilcm = 1; /*数据*/
  Rwlcm = 1; /*读数据*/
  Elcm = 1; /*读入到LCM*/
  _nop_();
  cbyte = Datalcm; /*从数据口读数据，真读 */
  Elcm = 0;
 }

/****************************************/
/* 数据写输出   */
/****************************************/

void Wrdata(Uchar X)
 {
 Locatexy();  /*坐标定位，返回时保留分区状态不变 */
// wtcom();
  Dilcm = 1; /*数据输出*/
  Rwlcm = 0; /*写输出  */
  Datalcm = X; /*数据输出到数据口 */
  Elcm = 1; /*读入到LCM*/
  _nop_();
  Elcm = 0;
 }

/****************************************/
/* 命令输出，每次输出一个分区控制口 */
/****************************************/

/*void Wrcmd(Uchar X)
// {
// Locatexy();  /*确定分区，返回时保留分区状态不变 */
// wtcom();  /*等待LCM操作允许 */
//  Dilcm = 0;   /*数据操作 */
//  Rwlcm = 0;   /*写输出   */
//  Datalcm = X;   /*数据输出到数据口 */
//  Elcm = 1;_nop_();Elcm = 0; /*读入到LCM*/
// }

/********************************/
/* 命令输出到左区控制口  */
/********************************/

void WrcmdL(Uchar X)
 {
  lcdbusyL();  /*确定分区，返回时保留分区状态不变*/
  Dilcm = 0;   /*命令操作 */
  Rwlcm = 0;   /*写输出   */
  Datalcm = X;   /*数据输出到数据口 */
  Elcm = 1;_nop_();Elcm = 0; /*读入到LCM*/
 }

/********************************/
/* 命令输出到中区控制口  */
/********************************/

void WrcmdM(Uchar X)
 {
  lcdbusyM();  /*确定分区，返回时保留分区状态不变*/
  Dilcm = 0;   /*命令操作 */
  Rwlcm = 0;   /*写输出   */
  Datalcm = X;   /*命令输出到数据口 */
  Elcm = 1;_nop_();Elcm = 0; /*读入到LCM*/
 }

/********************************/
/* 命令输出到右区控制口  */
/********************************/

void WrcmdR(Uchar X)
 {
  lcdbusyR(); /*确定分区，返回时保留分区状态不变 */
  Dilcm = 0;   /*命令操作 */
  Rwlcm = 0;   /*写输出   */
  Datalcm = X;   /*命令输出到数据口 */
  Elcm = 1;_nop_();Elcm = 0; /*读入到LCM*/
 }

/********************************************************/
/* 分区操作允许等待,返回时保留分区选择状态  */
/********************************************************/
void lcdbusyL(void)
 {
        CS1LCM = 0;  /*CLR CS1  */
        CS2LCM = 1;  /*SETB CS2  */
        CS3LCM = 1;  /*SETB CS3  */
 wtcom();  /* waitting for enable */
 }

void lcdbusyM(void)
 {
        CS1LCM = 1;  /*SETB CS1  */
        CS2LCM = 0;  /*CLR CS2  */
        CS3LCM = 1;  /*SETB CS3  */
 wtcom();  /* waitting for enable */
 }

void lcdbusyR(void)
 {
        CS1LCM = 1;  /*SETB CS1  */
        CS2LCM = 1;  /*SETB CS2  */
        CS3LCM = 0;  /*CLR CS3  */
 wtcom();  /* waitting for enable */
 }

void wtcom(void)
 {
 Dilcm = 0;  /*CLR DI  */
 Rwlcm = 1;  /*SETB RW  */
        Datalcm = 0xFF;  /* MOV DATA_LCM,#0FFH  */
 Elcm  = 1;_nop_();
       while(Datalcm & Lcdbusy);
       Elcm  = 0;
 }

/********************************************************/
/*根据设定的坐标数据，定位LCM上的下一个操作单元位置 */
/********************************************************/
void Locatexy(void)
 {
 unsigned char  x,y;
 switch (col&0xc0)  /*  col.and.0xC0 */
  {   /*条件分支执行  */
  case 0:  {lcdbusyL();break;} /*左区 */
  case 0x40: {lcdbusyM();break;} /*中区 */
  case 0x80: {lcdbusyR();break;} /*右区 */
  }
 x = col&0x3F|SETX;  /*  col.and.0x3f.or.setx */
 y = row&0x07|SETY;  /*  row.and.0x07.or.sety */
  wtcom();  /*  waitting for enable  */
  Dilcm = 0;   /*CLR DI */
  Rwlcm = 0;   /*CLR RW */
  Datalcm = y;   /* MOV P0,Y */
  Elcm = 1;_nop_();Elcm = 0;
  wtcom();  /*  waitting for enable  */
  Dilcm = 0;   /*CLR DI */
  Rwlcm = 0;   /*CLR RW */
  Datalcm = x;   /* MOV P0,X */
  Elcm = 1;_nop_();Elcm = 0;
 }

/********************************/
/*液晶屏初始化   */
/********************************/

void Lcminit(void)
 {
  cbyte = DISPOFF; /*关闭显示屏 */
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
  cbyte = DISPON;  /*打开显示屏 */
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
  cbyte = DISPFIRST; /*定义显示起始行为零 */
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
  Lcmcls();
  col=0;  /*清屏  */
  row=0;
  Locatexy();
 }
/********************************/
/* 延时    */
/********************************/
void Delay(Uchar MS)
 {
  Uchar us,usn;
  while(MS!=0)
   { usn = 4;
    while(usn!=0)
     {
      us=0xf0;
      while (us!=0){us--;};
      usn--;
     }
    MS--;
   }
 }

/********************************/
//file://定义字符串数组  */
/********************************/

Uchar code STR1[]=
  {
  0x80,0x81,0x82,0x83,0x84,0x85,
  0x86,0x87,0x88,0x89,0x8a,0x8B
  };

Uchar code STR2[]="Our friend over the wold";
Uchar code STR3[]="Program by Keil C51 6.12";
Uchar code STR4[]="Thank you ~v~ 1234567890";

/********************************/
/*  定义中文字库  */
/********************************/

Uchar code Hzk[]={
/*茂 C3515 0 */
  0x04,0x04,0xC4,0x44,0x5F,0x44,0x44,0xF4,
  0x44,0x4F,0x54,0x64,0x44,0x46,0x04,0x00,
  0x80,0x40,0x3F,0x00,0x40,0x40,0x20,0x20,
  0x13,0x0C,0x18,0x24,0x43,0x80,0xE0,0x00,
/*兴 C4843 1 */
  0x00,0xFE,0x4A,0x4A,0x00,0xFE,0xEA,0xAA,
  0xAA,0xFE,0x00,0x4A,0x4A,0xFE,0x00,0x00,
  0x02,0x83,0x42,0x22,0x12,0x1B,0x02,0x02,
  0x02,0x0B,0x12,0x22,0x62,0xC3,0x02,0x00,
/*国 C2590 2 */
  0x00,0xFE,0x02,0xD2,0x52,0x52,0xD2,0x3E,
  0xD2,0x16,0x1A,0x12,0xFF,0x02,0x00,0x00,
  0x00,0xFF,0x50,0x53,0x52,0x4A,0x6B,0x50,
  0x4F,0x54,0x7B,0x40,0xFF,0x00,0x00,0x00,
/*际 C2842 3 */
  0x00,0xFE,0x22,0xD2,0x0E,0x20,0xB8,0x4F,
  0xB2,0x9E,0x80,0x9F,0x72,0x8A,0x06,0x00,
  0x00,0xFF,0x04,0x08,0x07,0x21,0x12,0x0A,
  0x46,0x82,0x7E,0x06,0x0A,0x12,0x31,0x00,
/*（ C0308 4 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0xC0,0x30,0x08,0x04,0x02,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x03,0x0C,0x10,0x20,0x40,0x00,0x00,
/*广 C2567 5 */
  0x00,0x00,0xFC,0x44,0x54,0x54,0x7C,0x55,
  0xD6,0x54,0x7C,0x54,0x54,0x44,0x44,0x00,
  0x80,0x60,0x1F,0x80,0x9F,0x55,0x35,0x15,
  0x1F,0x15,0x15,0x35,0x5F,0x80,0x00,0x00,
/*东 C2211 6 */
  0x00,0x08,0xE8,0xA8,0xA8,0xA8,0xA8,0xFF,
  0xA8,0xA8,0xA8,0xA8,0xE8,0x0C,0x08,0x00,
  0x00,0x40,0x23,0x12,0x0A,0x06,0x02,0xFF,
  0x02,0x06,0x0A,0x12,0x23,0x60,0x20,0x00,
/*） C0309 7 */
  0x00,0x00,0x02,0x04,0x08,0x30,0xC0,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x40,0x20,0x10,0x0C,0x03,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*有 C5148 8 */
  0x04,0x04,0x04,0x84,0xE4,0x3C,0x27,0x24,
  0x24,0x24,0x24,0xF4,0x24,0x06,0x04,0x00,
  0x04,0x02,0x01,0x00,0xFF,0x09,0x09,0x09,
  0x09,0x49,0x89,0x7F,0x00,0x00,0x00,0x00,
/*限 C4762 9 */
  0x00,0xFE,0x02,0x22,0xDA,0x06,0x00,0xFE,
  0x92,0x92,0x92,0x92,0xFF,0x02,0x00,0x00,
  0x00,0xFF,0x08,0x10,0x08,0x07,0x00,0xFF,
  0x42,0x24,0x08,0x14,0x22,0x61,0x20,0x00,
/*公 C2511 10 */
  0x00,0x00,0x80,0x40,0x30,0x0C,0x00,0xC0,
  0x07,0x1A,0x20,0x40,0x80,0x80,0x80,0x00,
  0x01,0x01,0x20,0x70,0x28,0x24,0x23,0x20,
  0x20,0x28,0x30,0x60,0x00,0x01,0x00,0x00,
/*司 C4330 11 */
  0x10,0x10,0x92,0x92,0x92,0x92,0x92,0x92,
  0xD2,0x9A,0x12,0x02,0xFF,0x02,0x00,0x00,
  0x00,0x00,0x3F,0x10,0x10,0x10,0x10,0x10,
  0x3F,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,
};
/****************************************/
/* 定义ASCII字库8列*16行  */
/****************************************/

Uchar code Ezk[]={
/*-文字: --0x20 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:!--0x21 */
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x27,0x00,0x00,0x00,0x00,
/*-文字:"--0x22 */
  0x00,0x08,0x04,0x02,0x08,0x04,0x02,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:#--0x23 */
  0x40,0x40,0xF8,0x40,0x40,0xF8,0x40,0x00,
  0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,
/*-文字:$--0x24 */
  0x00,0x70,0x88,0xFC,0x08,0x08,0x30,0x00,
  0x00,0x1C,0x20,0xFF,0x21,0x22,0x1C,0x00,
/*-文字:%--0x25 */
  0xF0,0x08,0xF0,0x80,0x70,0x08,0x00,0x00,
  0x00,0x31,0x0E,0x01,0x1E,0x21,0x1E,0x00,
/*-文字:&--0x26 */
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
  0x1E,0x21,0x23,0x24,0x18,0x16,0x20,0x00,
/*-文字:'--0x27 */
  0x20,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:(--0x28 */
  0x00,0x00,0x00,0x00,0xC0,0x30,0x08,0x04,
  0x00,0x00,0x00,0x00,0x03,0x0C,0x10,0x20,
/*-文字:)--0x29 */
  0x04,0x08,0x30,0xC0,0x00,0x00,0x00,0x00,
  0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,
/*-文字:*--0x2a */
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
  0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,
/*-文字:+--0x2b */
  0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,
  0x01,0x01,0x01,0x0F,0x01,0x01,0x01,0x00,
/*-文字:,--0x2c */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x80,0x60,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:---0x2d */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,
/*-文字:.--0x2e */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:/--ox2f */
  0x00,0x00,0x00,0x00,0x00,0xE0,0x18,0x04,
  0x00,0x40,0x30,0x0C,0x03,0x00,0x00,0x00,
/*-文字:0--0x30 */
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
  0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:1--0x31 */
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
  0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
/*-文字:2--0x32 */
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
  0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,
/*-文字:3--0x33 */
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
  0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:4--0x34 */
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
  0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
/*-文字:5--0x35 */
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
  0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,
/*-文字:6--0x36 */
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
  0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,
/*-文字:7--0x37 */
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
  0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:8--0x38 */
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
  0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*-文字:9--0x39 */
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
  0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,
/*-文字::-- */
  0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,
  0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
/*-文字:/-- */
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
  0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,
/*-文字:<-- */
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
  0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,
/*-文字:=-- */
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
  0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,
/*-文字:>-- */
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
  0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,
/*-文字:?-- */
  0x00,0x30,0x08,0x08,0x08,0x88,0x70,0x00,
  0x00,0x00,0x00,0x26,0x01,0x00,0x00,0x00,
/*-文字:@-- */
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
  0x07,0x18,0x27,0x28,0x27,0x28,0x07,0x00,
/*-文字:A-- */
  0x00,0x00,0xE0,0x18,0x18,0xE0,0x00,0x00,
  0x30,0x0F,0x04,0x04,0x04,0x04,0x0F,0x30,
/*-文字:B-- */
  0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
  0x3F,0x21,0x21,0x21,0x21,0x12,0x0C,0x00,
/*-文字:C-- */
  0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
  0x0F,0x10,0x20,0x20,0x20,0x10,0x0C,0x00,
/*-文字:D-- */
  0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
  0x3F,0x20,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:E-- */
  0x00,0xF8,0x08,0x08,0x08,0x08,0x08,0x00,
  0x00,0x3F,0x21,0x21,0x21,0x21,0x20,0x00,
/*-文字:F-- */
  0xF8,0x08,0x08,0x08,0x08,0x08,0x08,0x00,
  0x3F,0x01,0x01,0x01,0x01,0x01,0x00,0x00,
/*-文字:G-- */
  0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
  0x0F,0x10,0x20,0x20,0x21,0x11,0x3F,0x00,
/*-文字:H-- */
  0x00,0xF8,0x00,0x00,0x00,0x00,0xF8,0x00,
  0x00,0x3F,0x01,0x01,0x01,0x01,0x3F,0x00,
/*-文字:I-- */
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:J-- */
  0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
  0x00,0x1C,0x20,0x20,0x20,0x20,0x1F,0x00,
/*-文字:K-- */
  0x00,0xF8,0x00,0x80,0x40,0x20,0x10,0x08,
  0x00,0x3F,0x01,0x00,0x03,0x04,0x18,0x20,
/*-文字:L-- */
  0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x00,
/*-文字:M-- */
  0xF8,0xE0,0x00,0x00,0x00,0xE0,0xF8,0x00,
  0x3F,0x00,0x0F,0x30,0x0F,0x00,0x3F,0x00,
/*-文字:N-- */
  0x00,0xF8,0x30,0xC0,0x00,0x00,0xF8,0x00,
  0x00,0x3F,0x00,0x01,0x06,0x18,0x3F,0x00,
/*-文字:O-- */
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
  0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:P-- */
  0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
  0x3F,0x02,0x02,0x02,0x02,0x01,0x00,0x00,
/*-文字:Q-- */
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
  0x00,0x0F,0x10,0x20,0x2C,0x10,0x2F,0x00,
/*-文字:R-- */
  0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
  0x3F,0x01,0x01,0x01,0x07,0x18,0x20,0x00,
/*-文字:S-- */
  0x60,0x90,0x88,0x08,0x08,0x10,0x20,0x00,
  0x0C,0x10,0x20,0x21,0x21,0x12,0x0C,0x00,
/*-文字:T-- */
  0x08,0x08,0x08,0xF8,0x08,0x08,0x08,0x00,
  0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:U-- */
  0xF8,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
  0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:V-- */
  0x18,0xE0,0x00,0x00,0x00,0xE0,0x18,0x00,
  0x00,0x01,0x0E,0x30,0x0E,0x01,0x00,0x00,
/*-文字:W-- */
  0xF8,0x00,0xC0,0x38,0xC0,0x00,0xF8,0x00,
  0x03,0x3C,0x03,0x00,0x03,0x3C,0x03,0x00,
/*-文字:X-- */
  0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
  0x20,0x18,0x06,0x01,0x06,0x18,0x20,0x00,
/*-文字:Y-- */
  0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
  0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:Z-- */
  0x08,0x08,0x08,0x08,0xC8,0x28,0x18,0x00,
  0x30,0x2C,0x22,0x21,0x20,0x20,0x20,0x00,
/*-文字:{-- */
  0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,
  0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:\-- */
  0x00,0x08,0x70,0x80,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x01,0x0E,0x30,0xC0,0x00,
/*-文字:}-- */
  0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,
  0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:^-- */
  0x00,0x08,0x04,0x02,0x02,0x04,0x08,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:_-- */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
/*-文字:`-- */
  0x00,0x00,0x02,0x06,0x04,0x08,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:a-- */
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
  0x00,0x19,0x24,0x24,0x24,0x14,0x3F,0x00,
/*-文字:b-- */
  0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
  0x00,0x3F,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:c-- */
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
  0x0E,0x11,0x20,0x20,0x20,0x20,0x11,0x00,
/*-文字:d-- */
  0x00,0x00,0x80,0x80,0x80,0x00,0xF8,0x00,
  0x00,0x1F,0x20,0x20,0x20,0x11,0x3F,0x00,
/*-文字:e-- */
  0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
  0x0E,0x15,0x24,0x24,0x24,0x25,0x16,0x00,
/*-文字:f-- */
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x00,
  0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:g-- */
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
  0x40,0xB7,0xA8,0xA8,0xA8,0xA7,0x40,0x00,
/*-文字:h-- */
  0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
  0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:i-- */
  0x00,0x00,0x00,0x98,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:j-- */
  0x00,0x00,0x00,0x00,0x98,0x00,0x00,0x00,
  0x00,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,
/*-文字:k-- */
  0x00,0xF8,0x00,0x00,0x00,0x80,0x00,0x00,
  0x00,0x3F,0x04,0x02,0x0D,0x10,0x20,0x00,
/*-文字:l-- */
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:m-- */
  0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,
  0x3F,0x00,0x00,0x3F,0x00,0x00,0x3F,0x00,
/*-文字:n-- */
  0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
  0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:o-- */
  0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
  0x0E,0x11,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:p-- */
  0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
  0x00,0xFF,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:q-- */
  0x00,0x00,0x80,0x80,0x80,0x00,0x80,0x00,
  0x00,0x1F,0x20,0x20,0x20,0x11,0xFF,0x00,
/*-文字:r-- */
  0x00,0x00,0x80,0x00,0x00,0x80,0x80,0x00,
  0x00,0x00,0x3F,0x01,0x01,0x00,0x00,0x00,
/*-文字:s-- */
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
  0x00,0x13,0x24,0x24,0x24,0x24,0x19,0x00,
/*-文字:t-- */
  0x00,0x80,0x80,0xE0,0x80,0x80,0x80,0x00,
  0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x00,
/*-文字:u-- */
  0x00,0x80,0x00,0x00,0x00,0x00,0x80,0x00,
  0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x00,
/*-文字:v-- */
  0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
  0x00,0x07,0x18,0x20,0x18,0x07,0x00,0x00,
/*-文字:w-- */
  0x80,0x00,0x00,0x80,0x00,0x00,0x80,0x00,
  0x0F,0x30,0x0E,0x01,0x0E,0x30,0x0F,0x00,
/*-文字:x-- */
  0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
  0x20,0x11,0x0A,0x04,0x0A,0x11,0x20,0x00,
/*-文字:y-- */
  0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
  0x00,0x87,0x98,0x60,0x18,0x07,0x00,0x00,
/*-文字:z-- */
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
  0x00,0x30,0x28,0x24,0x22,0x21,0x20,0x00,
/*-文字:{-- */
  0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,
  0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:|-- */
  0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
/*-文字:}-- */
  0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,
  0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:~-- */
  0x00,0x06,0x01,0x01,0x06,0x04,0x03,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};

关键词：

·上一文章：12864液晶显示源程序汇编程序
·下一文章：IC卡控制程序
[] [返回上一页] [打 印]

文章评论评论内容只代表网友观点，与本站立场无关！

   评论摘要(共 0 条，得分 0 分，平均 0 分)

推荐阅读

图文阅读

热门阅读

关于本站 | 网站帮助 | 广告合作 | 下载声明 | 友情连接 | 网站地图
Copyright © 2007-2017 down.gzweix.Com. All Rights Reserved .
页面执行时间：282,886.70000 毫秒