ALM-1612的主要特性和指标, 应用电路, 演示板和演示板所用元件表以及散射参数和测量参考平面:
1.575GHz GPS High-Gain Low Noise Amplifier with Integrated FiLTEr and Variable Current/Shutdown Function
Avago Technologies’ ALM-1612 is a GPS front-end module that combines a low-noise amplifier (LNA) with a GPS FBAR filter. The LNA uses Avago Technologies’ proprietary GaAs Enhancement-mode pHEMT process to achieve high gain with very low noise figure and high linearity. Noise figure distribution is very tightly controlLED. A CMOS-compati¬ble shutdown PIN is included either for turning the LNA on/off, or for current adjustment. The integrated filter utilizes an Avago Technologies’ leading-edge FBAR filter for exceptional rejection at Cell/PCS-Band frequencies.
The low noise figure and high gain, coupled with low current consumption make it suitable for use in critICal low-power GPS applications or during low-battery situations.
ALM-1612主要特性:
Very Low Noise Figure: 0.95 dB typ.
High Gain: 18.2 dB typ.
High IIP3 and IP1dB
Exceptional Cell/PCS-Band rejection
Advanced GaAs E-pHEMT & FBAR Technology
Low external component count
Shutdown current: < 5 uA
CMOS compatible shutdown pin (SD) current @ 2.7 V: 0.1mA
ESD: For RFin (Pin 3): ESD Human Body Model > 3kV; All other pins: ESD Machine Model = 70V, ESD Human Body Model = 350V
Meets MSL3
Useable down to 1.8V supply
Adjustable current via single external resistor/voltage
Small PACkage dimension: 3.3(L)x2.1(W)x1(H) mm3
ALM-1612主要指标(25度C典型性能)
At 1.575GHz, Vdd = 2.7V, Idd = 6.0mA
Gain = 18.2 dB
NF = 0.95 dB
IIP3 = +2 dBm, IP1dB = -8 dBm
S11 = -9 dB, S22 = -14 dB
Cell-Band Rejection: 69 dBc
PCS-Band Rejection: 67 dBc
应用:
GPS Receiver Front-end Module
图1.ALM-1612应用电路
图2.ALM-1612演示板
ALM-1612演示板所用元件表
图3. ALM-1612应用电路图
图4.ALM-1612散射参数和测量参考平面